3.3 KiB
3.3 KiB
[Project Name] — Technical Manual
Device: [Device Name]
Version: [Document Version]
Date: [YYYY-MM-DD]
Author: [Name / Contact]
Reviewed by: [Reviewer]
1. Purpose and Scope
- Purpose: Short description of what the device does.
- Scope: Define the application area.
- Target Audience: Who should use this manual (e.g., service technicians, engineers).
- Limitations: What is not covered or not allowed.
2. Safety Information
⚠️ Read before use!
2.1 General Safety
- Only trained personnel may operate the device.
- Follow standard ESD and laboratory safety rules.
2.2 Electrical Safety
- Max. internal voltage: [X V].
- Use only insulated test leads and approved measurement devices.
2.3 Residual Risks
- [List possible hazards in failure scenarios.]
3. Device Overview
3.1 Description
Short text describing device and functionality.
3.2 Front Panel Elements
| ID | Name | Function |
|---|---|---|
| SW1 | Channel Switch 1 | Activates channel 1 |
| LED1 | Status LED | Indicates request active |
| J1.1 | Connector | Test input/output |
3.3 Block Diagram
(Insert diagram or schematic here)
4. Intended Use
- The device is designed only for [specific purpose].
- Any other use is not permitted and voids responsibility of manufacturer.
5. Setup and Operation
5.1 Preconditions
- Batteries charged.
- All switches OFF.
5.2 Step-by-Step Procedure
| Step | Action | Expected Result | Remarks |
|---|---|---|---|
| 1 | Switch ON | LED lights green | — |
| 2 | Connect test cable J1.0 red/black | Channel LED active | — |
| 3 | Trigger tool GUI request | LED1 ON | Only one channel active |
(Add additional steps as needed)
6. Maintenance and Troubleshooting
6.1 Maintenance
- Replace fuse [specification].
- Replace batteries [specification].
6.2 Troubleshooting
| Symptom | Possible Cause | Remedy |
|---|---|---|
| No LED response | Battery empty | Replace batteries |
| Incorrect channel active | Miswiring | Check tool GUI configuration |
7. Technical Data
| Parameter | Value |
|---|---|
| Supply Voltage | [X V] |
| Fuse | [specification] |
| Battery | [type] |
| Max. current | [value] |
| Dimensions | [mm] |
| Weight | [g] |
8. References and Resources
- CAD files: [Link]
- Schematics: [Link]
- Git repository: [Link]
9. Document Control
| Version | Date | Author | Changes |
|---|---|---|---|
| 1.0 | YYYY-MM-DD | [Name] | Initial release |