108 lines
3.3 KiB
Markdown
108 lines
3.3 KiB
Markdown
# [Project Name] — Technical Manual
|
|
|
|
**Device:** [Device Name]
|
|
**Version:** [Document Version]
|
|
**Date:** [YYYY-MM-DD]
|
|
**Author:** [Name / Contact]
|
|
**Reviewed by:** [Reviewer]
|
|
|
|
---
|
|
|
|
## 1. Purpose and Scope
|
|
- **Purpose:** Short description of what the device does.
|
|
- **Scope:** Define the application area.
|
|
- **Target Audience:** Who should use this manual (e.g., service technicians, engineers).
|
|
- **Limitations:** What is not covered or not allowed.
|
|
|
|
---
|
|
|
|
## 2. Safety Information
|
|
⚠️ **Read before use!**
|
|
|
|
### 2.1 General Safety
|
|
- Only trained personnel may operate the device.
|
|
- Follow standard ESD and laboratory safety rules.
|
|
|
|
### 2.2 Electrical Safety
|
|
- Max. internal voltage: [X V].
|
|
- Use only insulated test leads and approved measurement devices.
|
|
|
|
### 2.3 Residual Risks
|
|
- [List possible hazards in failure scenarios.]
|
|
|
|
---
|
|
|
|
## 3. Device Overview
|
|
### 3.1 Description
|
|
Short text describing device and functionality.
|
|
|
|
### 3.2 Front Panel Elements
|
|
| ID | Name | Function |
|
|
|:-----:|:------------------|:--------------------------|
|
|
| SW1 | Channel Switch 1 | Activates channel 1 |
|
|
| LED1 | Status LED | Indicates request active |
|
|
| J1.1 | Connector | Test input/output |
|
|
|
|
### 3.3 Block Diagram
|
|
*(Insert diagram or schematic here)*
|
|
|
|
---
|
|
|
|
## 4. Intended Use
|
|
- The device is designed only for [specific purpose].
|
|
- Any other use is not permitted and voids responsibility of manufacturer.
|
|
|
|
---
|
|
|
|
## 5. Setup and Operation
|
|
### 5.1 Preconditions
|
|
- Batteries charged.
|
|
- All switches OFF.
|
|
|
|
### 5.2 Step-by-Step Procedure
|
|
| Step | Action | Expected Result | Remarks |
|
|
|:-----:|:----------------------------------|:----------------------|:--------------------------|
|
|
| 1 | Switch ON | LED lights green | — |
|
|
| 2 | Connect test cable J1.0 red/black | Channel LED active | — |
|
|
| 3 | Trigger tool GUI request | LED1 ON | Only one channel active |
|
|
|
|
*(Add additional steps as needed)*
|
|
|
|
---
|
|
|
|
## 6. Maintenance and Troubleshooting
|
|
### 6.1 Maintenance
|
|
- Replace fuse [specification].
|
|
- Replace batteries [specification].
|
|
|
|
### 6.2 Troubleshooting
|
|
| Symptom | Possible Cause | Remedy |
|
|
|:--------------------------|:------------------|:----------------------------------|
|
|
| No LED response | Battery empty | Replace batteries |
|
|
| Incorrect channel active | Miswiring | Check tool GUI configuration |
|
|
|
|
---
|
|
|
|
## 7. Technical Data
|
|
| Parameter | Value |
|
|
|:------------------|:------------------|
|
|
| Supply Voltage | [X V] |
|
|
| Fuse | [specification] |
|
|
| Battery | [type] |
|
|
| Max. current | [value] |
|
|
| Dimensions | [mm] |
|
|
| Weight | [g] |
|
|
|
|
---
|
|
|
|
## 8. References and Resources
|
|
- CAD files: [Link]
|
|
- Schematics: [Link]
|
|
- Git repository: [Link]
|
|
|
|
---
|
|
|
|
## 9. Document Control
|
|
| Version | Date | Author | Changes |
|
|
|:-------:|:----------:|:-----------|:------------------------------------------|
|
|
| 1.0 | YYYY-MM-DD | [Name] | Initial release | |