# [Project Name] — Technical Manual

**Device:** [Device Name]  
**Version:** [Document Version]  
**Date:** [YYYY-MM-DD]  
**Author:** [Name / Contact]  
**Reviewed by:** [Reviewer]  

---

## 1. Purpose and Scope
- **Purpose:** Short description of what the device does.  
- **Scope:** Define the application area.  
- **Target Audience:** Who should use this manual (e.g., service technicians, engineers).  
- **Limitations:** What is not covered or not allowed.  

---

## 2. Safety Information
⚠️ **Read before use!**

### 2.1 General Safety
- Only trained personnel may operate the device.  
- Follow standard ESD and laboratory safety rules.  

### 2.2 Electrical Safety
- Max. internal voltage: [X V].  
- Use only insulated test leads and approved measurement devices.  

### 2.3 Residual Risks
- [List possible hazards in failure scenarios.]  

---

## 3. Device Overview
### 3.1 Description
Short text describing device and functionality.  

### 3.2 Front Panel Elements
| ID    | Name              | Function                  |
|:-----:|:------------------|:--------------------------|
| SW1   | Channel Switch 1  | Activates channel 1       |
| LED1  | Status LED        | Indicates request active  |
| J1.1  | Connector         | Test input/output         |

### 3.3 Block Diagram
*(Insert diagram or schematic here)*  

---

## 4. Intended Use
- The device is designed only for [specific purpose].  
- Any other use is not permitted and voids responsibility of manufacturer.  

---

## 5. Setup and Operation
### 5.1 Preconditions
- Batteries charged.  
- All switches OFF.  

### 5.2 Step-by-Step Procedure
| Step  | Action                            | Expected Result       | Remarks                   |
|:-----:|:----------------------------------|:----------------------|:--------------------------|
| 1     | Switch ON                         | LED lights green      | —                         |
| 2     | Connect test cable J1.0 red/black | Channel LED active    | —                         |
| 3     | Trigger tool GUI request          | LED1 ON               | Only one channel active   |

*(Add additional steps as needed)*  

---

## 6. Maintenance and Troubleshooting
### 6.1 Maintenance
- Replace fuse [specification].  
- Replace batteries [specification].  

### 6.2 Troubleshooting
| Symptom                   | Possible Cause    | Remedy                            |
|:--------------------------|:------------------|:----------------------------------|
| No LED response           | Battery empty     | Replace batteries                 |
| Incorrect channel active  | Miswiring         | Check tool GUI configuration      |

---

## 7. Technical Data
| Parameter         | Value             |
|:------------------|:------------------|
| Supply Voltage    | [X V]             |
| Fuse              | [specification]   |
| Battery           | [type]            |
| Max. current      | [value]           |
| Dimensions        | [mm]              |
| Weight            | [g]               |

---

## 8. References and Resources
- CAD files: [Link]  
- Schematics: [Link]  
- Git repository: [Link]  

---

## 9. Document Control
| Version | Date       | Author     | Changes                                   |
|:-------:|:----------:|:-----------|:------------------------------------------|
| 1.0     | YYYY-MM-DD | [Name]     | Initial release                           |