Setup Git

2025-10-27 20:55:09 +01:00
parent 92e1a3dd1c
commit 34a840a0ad
7 changed files with 24314 additions and 0 deletions
--- a/0004-DenshaBekutoru.md
+++ b/0004-DenshaBekutoru.md
@ -0,0 +1,108 @@
+# [Project Name] — Technical Manual
+
+**Device:** [Device Name]  
+**Version:** [Document Version]  
+**Date:** [YYYY-MM-DD]  
+**Author:** [Name / Contact]  
+**Reviewed by:** [Reviewer]  
+
+---
+
+## 1. Purpose and Scope
+- **Purpose:** Short description of what the device does.  
+- **Scope:** Define the application area.  
+- **Target Audience:** Who should use this manual (e.g., service technicians, engineers).  
+- **Limitations:** What is not covered or not allowed.  
+
+---
+
+## 2. Safety Information
+⚠️ **Read before use!**
+
+### 2.1 General Safety
+- Only trained personnel may operate the device.  
+- Follow standard ESD and laboratory safety rules.  
+
+### 2.2 Electrical Safety
+- Max. internal voltage: [X V].  
+- Use only insulated test leads and approved measurement devices.  
+
+### 2.3 Residual Risks
+- [List possible hazards in failure scenarios.]  
+
+---
+
+## 3. Device Overview
+### 3.1 Description
+Short text describing device and functionality.  
+
+### 3.2 Front Panel Elements
+| ID    | Name              | Function                  |
+|:-----:|:------------------|:--------------------------|
+| SW1   | Channel Switch 1  | Activates channel 1       |
+| LED1  | Status LED        | Indicates request active  |
+| J1.1  | Connector         | Test input/output         |
+
+### 3.3 Block Diagram
+*(Insert diagram or schematic here)*  
+
+---
+
+## 4. Intended Use
+- The device is designed only for [specific purpose].  
+- Any other use is not permitted and voids responsibility of manufacturer.  
+
+---
+
+## 5. Setup and Operation
+### 5.1 Preconditions
+- Batteries charged.  
+- All switches OFF.  
+
+### 5.2 Step-by-Step Procedure
+| Step  | Action                            | Expected Result       | Remarks                   |
+|:-----:|:----------------------------------|:----------------------|:--------------------------|
+| 1     | Switch ON                         | LED lights green      | —                         |
+| 2     | Connect test cable J1.0 red/black | Channel LED active    | —                         |
+| 3     | Trigger tool GUI request          | LED1 ON               | Only one channel active   |
+
+*(Add additional steps as needed)*  
+
+---
+
+## 6. Maintenance and Troubleshooting
+### 6.1 Maintenance
+- Replace fuse [specification].  
+- Replace batteries [specification].  
+
+### 6.2 Troubleshooting
+| Symptom                   | Possible Cause    | Remedy                            |
+|:--------------------------|:------------------|:----------------------------------|
+| No LED response           | Battery empty     | Replace batteries                 |
+| Incorrect channel active  | Miswiring         | Check tool GUI configuration      |
+
+---
+
+## 7. Technical Data
+| Parameter         | Value             |
+|:------------------|:------------------|
+| Supply Voltage    | [X V]             |
+| Fuse              | [specification]   |
+| Battery           | [type]            |
+| Max. current      | [value]           |
+| Dimensions        | [mm]              |
+| Weight            | [g]               |
+
+---
+
+## 8. References and Resources
+- CAD files: [Link]  
+- Schematics: [Link]  
+- Git repository: [Link]  
+
+---
+
+## 9. Document Control
+| Version | Date       | Author     | Changes                                   |
+|:-------:|:----------:|:-----------|:------------------------------------------|
+| 1.0     | YYYY-MM-DD | [Name]     | Initial release                           |